Products

MGN develops and manufactures a complete line of products to cover all feed production processes, for installation in existing or new feed lines.

Intake pits

Intake pits are used for truck discharge. They are usually built under ground to facilitate the unloading of raw materials. Features of the intake pits: Built in sheet metal, including chassis in the structural tube and reinforcements according to the pit dimensions....

read more

Silos

  Galvanised sheet metal silos are nowadays the best alternative for grain storage thanks to their versatility, easy assembly, hygienic handling and low storage cost. We design our silos based on your needs, with the latest technological resources and using the best...

read more

Cells

The cells (or square silos) allow storage of 25% more product on the same surface area. They are recommended in feed mills and flour mills, since they are easy to assemble and have a system of eliminating dust that facilitates keeping them clean. The modular system of...

read more

Big-bag

The dosing units equipped with BIG-BAG are made up of: General support chassis. Bag emptying hopper with dustproof opening. Hanging mobile container. Rotary coupling to screw conveyor.

read more

Hoppers

The dosing of materials is done through hoppers, whose capacity depends on the volume of the dose. MGN manufactures hoppers of different sizes depending on the needs of the installation. Features of the hoppers: Hoppers can be square or round, depending on the needs....

read more

Hammer mills

MGN "AR" series hammer mills are especially suitable for milling. Among their main features are that they regulate the speed of the milling, the degree of fineness and have easy to remove sieves for easy maintenance. This machine is of robust construction, consisting...

read more

Dosing scales

MGN dosing scales have been specially designed to weigh cereals, flours, micro-components and macro-components fast and accurately. Features of the dosing scales: Sheet metal constructed hopper with reinforcements according to the dimensions. Chassis and legs in...

read more

Dosers

The dosing of materials is done through hoppers, which capacity depends on the volume of the dose. Features of the Dosers: They can be round or square, with different degrees of inclination in the cone. They can be manufactured in standard steel sheet or in stainless...

read more

Mixers

MGN mixers allow the homogeneous mixing of all elements and are available for capacities between 100 and 10,000 litres. They are specially designed to provide long life to the components and to require minimal maintenance. Features of Mixers: A circular trough-track...

read more

Pelleting equipment

The pelleting process means to subject a flour to a combined effect of compression and extrusion. Features of the pelleting equipment: Complete installation of Granulation Lines, with presses, coolers, cyclones, steam boilers and systems for greasing, shredding and...

read more

Crumblers

The crumblers transform the granules into high quality crumbs, with uniformity in the size and minimum presence of fine particles. The simple control of the feed flow and the size of the crumbled product gives these machines high performance and excellent...

read more

Conditioners

The MGN conditioner is built in stainless steel and features a motor coupled to the shaft through pulleys and belts, with connections for the addition of two liquids and steam. The inspection windows facilitate product inspection, homogenisation and mixing. The...

read more

Coolers

MGN counter-current coolers feature a special construction, through which ambient air is sucked through the bottom of the cooler by a fan and passed through the adjustable layer of pellets. The cooler bottom is a hermetically sealed construction to keep the pellets...

read more

Chain conveyors

MGN offers a wide range of chain conveyors for the reception and distribution of raw materials. Main features of chain conveyors: The MGN industrial grain conveyor is engineered to withstand the most demanding environments during grain handling operations. The solid...

read more

Helical conveyors

Features of the Helical conveyors: A "U" section channel built in 3mm steel sheet. It is enclosed with a screwed, water tight 2 mm cover. The screw is a tubular shaft on which is mounted a propeller of thick enough for the type of product to be handled. Driven by a...

read more

Paddle conveyors

Features of the Paddle conveyors: A U-section channel built in 3 mm sheet metal, in sections of two and three meters, bolted and flanged for compact connection with 60x10 mm plate. Steel chains on guides are formed by longitudinal sheet, depth and width according to...

read more

Screw conveyors

Features of the Screw conveyors: Tube of circular section built in 2 mm. steel sheet. Thread constructed by a tubular shaft on which the 5 mm thick propeller is mounted to the outside. Driven by a gear motor, SIEMENS/FLENDER or NORD. Indication for dosages of small...

read more

Distributors

Features of the Distributors: Distributors have an inclination of 45-60º, built in 3 mm steel sheet. The upper part is built in 4 mm steel sheet and there is a cone in the lower distributor. The internal rotary duct is built in 6 mm. steel sheet. Powered by a 0.25 hp....

read more

Bucket elevators

Features of the bucket elevators: The top is built in steel sheet. It is removable to facilitate repair in case of breakdown. Traction pulley for a better drag of the buckets belt. It is made of two layers of fabric with P.V.C. coating on both sides. Buckets are made...

read more

Flow diverters

Features of the flow deverters Tube of circular section built in 2 mm. Driven by a SIEMENS/FLENDER gear-motor

read more

Belt conveyors

Our belt conveyors stand out for the best relation between tn/h of transporting and power. They are also as well ideal for the handling and conveying of delicate products. And they generate a minimum level of noise during the operation. Capacity. The level of...

read more

Discharge gates

Features of the Discharge gates: 3 mm steel plate frame, folded forming "U" profiles adaptable to any unload weights. The 4 mm chopper slides on round head screws. Drives: Manual sprockets and chain. Pneumatic with UNIVER cylinders. Upper and lower cover for better...

read more

Filters

The control of dust and emissions, as well as the use of chemicals for the microbiological control of raw materials, are very important to ensure good hygiene conditions when receiving the raw material in the feed mill. The filter sucks the air from the grinding...

read more

Accessories

  Accessories Rotary sieves The top and carcass are made of 4 mm. steel sheet. The areas in contact with the material are made of 10 mm. steel sheet, which are detachable for repair in case of failure. Sifters The top and carcass are made of 4 mm. steel sheet. The...

read more

Installations

Installations Pneumatic installation For the opening and control of all gates, the installation is equipped with a compressed air network from the compressor to the gates, together with drive cylinders and solenoid valves,  the air is channelled through copper pipes....

read more

Control panels

      We provide a turn-key global solution for the automation of the plant, which includes:   Control software Electrical installation Industrial control systems: PLC's, SCADAS Control and power...

read more

Need more information?

Request a no obligation quote